投稿指南 投放广告
热门: AOI 焊锡桥连 焊锡桥
产品特写
Focus On 11th Vision Awards
DELO:新的喷射式点胶阀DELO-DOT PN3
材料来源:The 11th Vision Awards           录入时间:2017/5/8 15:22:07

参赛公司:DELO Industrial Adhesives
       参赛类别:点胶与涂布设备
       获奖名称:远见奖 - Vision Award


新的喷射式点胶阀DELO-DOT PN3

A new, compact jet valve DELO-DOT PN3

我们以改善性能与操控性为重点,研发出新的喷射式点胶阀 DELO-DOT PN3。这一点胶阀输出率高,可以便捷地整合入生产线内。DELO-DOT PN3 专为难以配量的介质而设计。凭借其提升的喷射性能,可进行微量(远远小于常规量)点胶。部分产品可以 0.009 毫克的微量进行持续点胶,在保障效率的同时也环保地利用资源。DELO-DOT PN3 应用范围很广,它的点胶量最高可达 14 毫克。

DELO-DOT PN3 采用两种不同规格的点胶活塞,其中之一用于微量点胶,另一种用于小至中等尺寸的液滴。其点胶频率最高可达每秒钟 330 滴。

这一新式点胶阀十分容易设置: 活塞的行程可用一个转轮轻松地调节,只需选择五个锁定位置之一即可,无需额外的工具。LED指示灯会显示转轮的位置,方便检查活塞设置。

这款即插即用的设备还装有新研发的喷嘴加热器,采用螺旋固定的方式直接安装在点胶阀上。加热系统设计成一个单独的模块,点胶阀的其它部分也是如此。因此,加热器与其它模块式零件很容易拆卸、清洗与保养。液体系统与气动致动器(已注册专利)隔开,从而确保设备使用寿命长(在没有保养维护的情况下,最多可达10亿个周期),这也意味着高效能与低成本。(SMTC@ACT)


图解:DELO德路应用工程师Mike Liu先生代表上台领奖留念。图片来源:SMT China

The new, compact jet valve DELO-DOT PN3 has been developed with a special focus on performance and handling. The valve is easily integrated into production lines with high output rates. Designed for media that is difficult to dispense, DELO-DOT PN3’s increased jetting performance allows adhesives to be dispensed in significantly smaller quantities than usual. Some products can be jetted consistently in amounts as low as 0.009 mg, offering an efficient and environmental friendly usage of resources. If higher amounts are required, DELO-DOT PN3 provides a wide range of applications up 14mg.

The DELO-DOT PN3 piston styles, one for dispensing miniscule amounts and one for small to medium drop sizes, provide an operating frequency of up to 330 drops per second.

This new valve allows you to set the stroke of the piston easily with a rotary wheel to select one of five different locking positions, not requiring any additional tools. The position of the wheel is indicated by LED lights, making it easier to check the stroke setting.

This plug-and-play system’s newly developed nozzle heater has no open electric contacts and is screwed directly onto the valve. The heating system is designed as a separate module, as is the rest of the valve. The heater, together with the other modular parts, allows easier disassembly for cleaning and service; the separation of the fluid system together with the patent-registered pneumatic actuator ensures a long lifetime of up to 1 billion cycles without servicing, which demonstrates its cost-effectiveness.



上一篇:Viscom:S3088 Ult... 下一篇:H.K. Wentworth:T...

版权声明:
《SMT China 表面组装技术》网站的一切内容及解释权皆归《SMT China 表面组装技术》杂志社版权所有,未经书面同意不得转载,违者必究!
《SMT China 表面组装技术》杂志社。
 
 
 
 
友情链接
  首页 | 关于我们 | 联络我们
Copyright© 2017: 《SMT China 表面组装技术》; All Rights Reserved.
请用 Microsoft Internet Explorer 6.0 或以上版本。
Please use Microsoft Internet Explorer 6.0 or higher version.
备案序号:粤ICP备12025165号